Missed Dose Injection

The DIA:CONN P8 has a feature called "Missed Dose Injection," which allows users to recall and inject a previously set dose that was not entirely administered in certain situations. Users can easily and quickly inject the missed dose with just a few button presses on the main screen.

1. When a missed dose occurs due to a blockage during injection or insufficient insulin, a warning screen will appear, accompanied by an alert sound. Press the [ACT] button at this point to dismiss the warning and return to the main screen.

   • The main screen will display the amount of insulin injected up to the point before the blockage occurred.

2. After completing the necessary user actions based on the situation, pressing the [ACT] button will show a screen to confirm whether you want to proceed with the missed dose injection. To proceed with the missed dose, select 'Yes' and press the [ACT] button to navigate to the missed dose setup screen.

   • Selecting 'No' will remove the previous missed dose information and return you to the main screen.

3. On the missed dose setup screen, verify the dose and make any additional adjustments if necessary.

4. After completing the dose setup, insert the needle into your body and press [ACT] to begin the injection.

5. Once the injection is completed successfully, follow the subsequent steps to conclude the injection.

Utilizing Memory for Dose Setting

The DIA:CONN P8 offers a memory feature for convenient dose setting. User-configured injection information is recorded in the P8, allowing you to quickly select previous injection amounts and proceed with injections when needed.

1. Press the [M] button on the main screen to access the memory screen.

2. On the memory screen, use the [△] or [▽] buttons to select the previous injection amount you desire.

3. Press the [ACT] button to enter the dose setup screen. Once the final dose is confirmed, insert the needle into your body for insulin injection.

4. Finally, press the [ACT] button to start the injection. Once all the insulin has been injected, follow the procedure to complete the injection.

Setting the Injection Speed

The DIA:CONN P8 provides a feature that allows users to adjust the injection speed of insulin. There are four available injection speed settings: 0.2U per second, 0.5U per second, 1U per second, and 2U per second.

1. Press and hold the [M] button on the main screen for 1 second to access the menu screen.

2. In the menu screen, select the "Injection Speed" option, and press [ACT].

3. When the injection speed setup screen appears, choose your desired speed using the [△] or [▽] buttons, then press [ACT] to confirm the injection speed settings.